Step #1
The Kleimheist is easier to tie and untie than the
prusik. It does not tend to cinch up as tightly as a prusik, so it is easier
to break friction after releasing the load. You can add more turns to increase
friction, as well.
Step #1 | |
| Place a bight of the loop behind the climbing rope. | |
Step #2 | |
| Wrap the loop across the climbing rope. |  |
Step #3 | |
| Wrap the loop behind the climbing rope. |  |
Step #4 | |
| Repeat steps 2 - 3 two more times. |  |
Step #5 | |
| Insert the loop through the original bight |  |
Finished Kleimheist | |
| Pull the loop back down, bringing the bight down across the wraps. Tighten the knot. |  |